Views: 6 Author: Site Editor Publish Time: 2022-10-20 Origin: Site
Correct maintenance method of crusher blades:
Routine inspection is required every time the grinder blade works for 1-2 days (8 hours of working time/day), and the blade is slightly sharpened with a whetstone every 3-4 days (angle grinder cannot be used).
When the blade is worn to a certain extent, it needs to be returned to the factory for regrinding. After regrinding and installation, the distance between the flying knife and the fixed knife must be adjusted.
Adjustment method of the blade: gently push the bedknife back and forth, and then tighten the bolts. When the flying knife is fastened, start from the middle bolt and fasten to both sides. When installing the blade, clean the blade seat to ensure that there is no foreign matter that makes the blade suspended. (Note: Blade grinding requires special equipment, do not operate it yourself.)
In order to ensure that the machine reaches the most ideal state, select the corresponding pulverizer blade according to the size of the pulverized material, and do not use unmatched knives for pulverization, which will seriously reduce the service life of the blade.
