Views: 8 Author: Site Editor Publish Time: 2023-01-09 Origin: Site
The twin shaft shredder blade is one of the shredder equipment with high utilization rate. It can be used to tear a variety of materials, such as plastic, rubber, fiber, paper, wood, electrical materials, cables, nozzle materials, rubber heads, PET bottles, cardboard, circuit boards, wood, plastic barrels, etc. Sometimes it is also used to tear up hard materials, such as nylon, ABS, PC and other high-strength engineering plastics, so there is a high demand for blades.
The blade of the twin shaft shredder is one of the very important parts of the twin shaft shredder. In the process of use, we should pay attention to the following matters:
1. During the transportation of the blade, it must be packed in wooden cases to prevent the blade claw from being damaged due to collision.
2. Before the device, carefully check the blade. If there is any gap or tooth loss, timely communicate with the blade manufacturer.
3. During installation, handle with care. Do not damage the claw due to collision.
4. After the installation of the blade, check the distance between the blade and the spacer sleeve. At the same time, check whether there are foreign matters. Make sure that the thickness of the spacer sleeve is slightly thicker than the blade.
5. After the installation is completed, the trial run and logistics crushing operation shall be carried out to ensure that the dual axis shredder blade can operate normally.
