What Causes The Crusher Blade Not To Be Sharp?

Crusher blades are also called mechanical blades. They are of various types and are made of high-quality steel. They have good sharpness and wear resistance. They are mainly used in the crushing of plastics, plastics and other industries. Like other heads, it requires precise geometrical standard tolerances to ensure good installation quality with the equipment.

Different customers need different raw materials for crushing different products. Appropriate cutting edge angle not only maintains the sharpness of the cutting edge, but also makes the cutting edge have a certain compressive strength and does not chip during use.

A better heat treatment process can ensure that the strength of the cutter head is suitable and the thermal stress is small, and the pulverizer blade will not be deformed during use.

So, what causes the crusher blade not to be sharp?

1. The cutter head is not damaged, but not sharp

If the smoothness of the cutter head of the pulverizer blade is not good, the powdery wood residue may stick to the cutter head, which will also cause the cutter head to become dull. If such a situation occurs, it is necessary to remove the debris stuck in the cutter head in time to make the cutter head smooth.

2. The cutter head is slightly worn and becomes unsharp

If the crusher blade is only slightly worn, the head can be removed, cleaned, cleaned and polished by hand, and the head reassembled for a smooth finish.

3. The cutter head is not sharp due to the use of more

Generally speaking, this is also because the working intensity of the crusher is too high, or the hardness of the broken wood is too high, resulting in serious damage to the cutter head. In this case, a new cutter head must be replaced. Generally, it is necessary to pay attention to the equipment when purchasing the cutter head. Model size to choose.