How to replace the shredder blade?

Fixation of the shredder blade: First, check the newly obtained blade, check the angle and width of the blade grinding, and clean the blade with a soft cloth (wiping the blade from the back to the blade, not against or along the blade). Then screw the accessory tool wrench into the screw hole of the sharpened or replaced blade, place it on the accessory, push it near the blade bed, lift the blade so that the two holes in the middle groove of the blade hang on the hook that extends from the blade bed, remove the tool handle, insert the tool wrench into the hexagonal hole of the blade bed, rotate clockwise, and the blade will automatically rise to the fixed position. Tighten all bolts that secure the blades on the cutting bed. Pay attention to the entire process and be careful not to let the blade touch any hard object. After Z, collect various tools to complete the fixation of the shredder blade.

When the shredder blade is in the upper position, turn off the power switch, stop the machine movement, put the machine in a shutdown state, place the machine in a turning position, and the turning gear will stop the cutting bed in the middle position. When replacing the blade, loosen all the screws that fasten the blade on the blade bed, insert the accessory tool wrench into the hexagonal hole on the blade bed, rotate counterclockwise, and the blade will automatically fall down. Install the screw of the accessory tool handle into the screw hole of the blade, hold the tool handle, and remove the blade from the hook and place it on the accessory frame, then put it into the box for grinding.