Views: 1 Author: Site Editor Publish Time: 2022-07-20 Origin: Site
As an important equipment in the plastic processing industry, the blade of the plastic crusher should also be used reasonably in the process of use and operation. Care must be taken in the process of operation. When using, attention must be paid to the following problems, which is a handy operation of the crusher.
1. When installing the shredder blade, be sure to tighten the screws, pay attention not to touch the knife hair between the upper and lower knives, and don't forget to check whether the fasteners are fastened.
2. Before starting the crusher, turn the moving knife shaft by hand under the condition of ensuring safety, and see if it is not flexibly lubricated. The gap between the knife edge and the knife edge of the plastic crusher blade should not be too large, which will make the crushed material not fine.
3. The belt pulley of some crushers can be changed to select different shaft numbers. When it is uncertain whether the crushed material needs to be changed, the previous gear should be used, otherwise selecting the gear with too fast speed will accelerate the loss of plastic blades.
4. After all the above are OK, pick out the metal when putting the waste into the machine mouth. If the metal hardness is too high, the blade of the high-speed plastic crusher will directly crack when it is touched. Once the plastic blade is worn, it should be repaired and replaced in time. If there is any abnormality in the use process, it should be cut off in time and then checked, so as to ensure safe use.
