What should I pay attention to when using the shredder knife?

The hydraulic coupling, head, tail, motor, reducer, and other connecting parts of the crusher must be complete and intact, and the reducer and hydraulic coupling shall be fastened without oil leakage and oil leakage, and the oil quantity shall be appropriate; Make sure that it will not cause unnecessary impact on the pulverizer blade; The coal, gangue, sundries near the machine head and the coal dust of the motor and reducer must be cleaned to reduce the sundries of the tool; The scraper chain plate must be moderate, and the scraper and screws must be complete and tight; Do not start the spray sprinkler without signal to avoid tool collision; Do not start the spray sprinkler without signal to avoid tool collision;

When the transfer machine is started under the condition of bridge body, the operation of each part of the drying equipment shall be free of abnormal sound, and the scraper, chain and connecting ring shall be free of torsion, fried dough twist and bending deformation; The traveling trolley of the transfer machine must be stable and reliable, and the tool must be stable; The safety protection net and protection device of the plastic crusher blade shall be safe and reliable without deformation and failure.