Views: 3 Author: Site Editor Publish Time: 2024-05-22 Origin: Site
1. There should be sufficient steel bar stacking areas around the Blade For Cutting Rebar.
2. The rotating parts of the steel bar cutting machine should have protective covers.
3. It is necessary to check whether the Blade For Cutting Rebar has cracks and whether the blade fixing screws are tightened.
4. It is not allowed to hold the two ends of the steel bar with both hands and cut them separately. Only the steel bar near the side can be held with one hand.
5. When working, hold the steel bar with both hands and align it with the blade edge. When the blade comes down and feels pressure, immediately apply force to press the steel bar to prevent the end from lifting and injuring people.
6. It is prohibited to cut steel bars with a diameter exceeding the specified diameter of the cutting machine and red burned steel bars. When multiple steel bars are cut simultaneously, the cross-section of the steel bars must be converted and the blades adjusted in a timely manner to prevent accidents.
