1. There should be sufficient steel bar stacking areas around the steel bar cutting machine.2. The rotating parts of the steel bar cutting machine should have protective covers.3. It is necessary to check whether the cutting machine blade has cracks and whether the blade fixing screws are tightened.
(1) Due to the removal of the foot pedal positioning screw during packaging, the walking wheel should be installed before installation and use, and then the foot pedal positioning screw should be tightenedFixed, make the blade move when the pedal is pressed down, and stop moving when it is released.
The higher the hardness level of the cutting blade, the better the wear resistance conditions. This is due to the uniformity of the carbide formed particles at the cutting edge. The hardness of vanadium carbide particles is 85HRC, and the hardness of chromium carbide particles is 72HRC. The hardness
The lubricating oil inside the bearings of the granulator should be regularly replaced and charged, and the electrical components should be regularly checked for normal operation and safety and reliability. The cutter blades should be kept clean regularly, and the unpainted parts should not rust or
The development and progress of society have created the development and rise of a large number of emerging industries, which are the products of the times and are also built to meet more needs of the people. Therefore, most of them have good advantages and have a large number of support groups. The
Nanjing shredder blades served by Nanjing Huaxin mechanical tool manufacturing Co., Ltd. are very popular with users and enjoy a high position among consumers. The company has established long-term and stable cooperative relations with many large enterprises in Nanjing, Jiangsu Province. The blade o
